2
Figure 1. (A) Front Cover (B) ScrewRemoval (C) Handle
Rotation
4. Place the coil on the mechanism top plate
and assemble the connector marked as CCC
from the Command closing coil to the connector
marked as CCC in the Trip unit harness as shown
in Fig. 2.
Figure 2. Plug Assembly
5
.
Tilt the coil forward and engage the front
hooks into the mechanism top support plate as
shown in the Fig. 3.
Figure 3. Coil Assembly
6. Tilt the device backwards until the rear hooks
engage in the slots on the mechanism top
support plate as shown in the Fig. 4.
Figure 4. Coil Assembly
7. After installing the closing coil on the
mechanism top plate, connect the input wire
assembly plug to the A9- A10-A11 locations
marked on the secondary disconnect as shown
in Fig. 5.
