Publication No. GBX24-0HH/2
Configuration 17
3 •
Configuration
3.1 Link Configuration
The
GBX24
has
push
‐
on
jumpers
included
in
the
standard
kit
of
parts;
additional
jumpers
may
be
obtained
on
request.
These
are
suitable
for
level
1
to
3
low
vibration
applications.
TIP
For Level 4 and 5 products, make links by wire-wrapping between the pin posts and then cover these
wire wrapped links with the same conformal coating as that used on the board. This will provide a
reliable connection under heavy shock and vibration conditions and further prevent oxidation of the
connection due to moisture ingress.
Figure 3-1 Link Positions
Figure
3
‐
1
shows
standard
2.54
mm
pitch
headers
for
general
use.
This
manual
refers
to
jumper
settings
as
In
or
Out.
Meanings
are
as
follows:
In
=
jumper
fitted
‐
Out
=
jumper
not
fitted
‐
3.2 Inspection
The
GBX24
is
shipped
from
the
factory
with
no
configuration
jumpers
fitted.
