1200-2000 Series Fire Panels, Repeaters, and Emulators
Interconnection and Wiring Guide
13
3.3.3
Relay outputs (Class B)
OUT1 / OUT2 / OUT3
Two configurations are available. The configuration is determined by jumper settings.
Figure 8: Two configurations for relay outputs 1-3 B (shown as not active)
Table 1: Relay configuration option for outputs OUT1, OUT2, and OUT3
Output
Configuration 1
Configuration 2
Comment
J12 in
J12 out
J18 out
OUT1 (Sounders)
J13 out
J13 in
J19 out
J2 in
J2 out
J18 out
OUT2 (Fire brigade)
J3 out
J3 in
J19 out
J4 in
J4 out
OUT3 (Fire protection)
J5 out
J5 in
OUT4
The configurations for OUT4 are shown below (failsafe). The switch is
closed
when there is a fault and
open
when there is no fault.
Figure 9: Two configurations for relay output 4 B
Table 2: Relay configuration option for output OUT4,
Output
Configuration 1
Configuration 2
J6 in
J6 out
OUT4 (Fault routing)
J7 out
J7 in
