GE FH10, Руководство пользователя

Страница: 10 / 32

Customer Ser
vice
Tr
oubleshooting T
ips
Operating Instr
uctions
Safety Instr
uctions
Installation Instr
uctions
Customer Ser
vice
Tr
oubleshooting T
ips
Installation Instr
uctions
Safety Instr
uctions
Operating Instr
uctions
Customer Ser
vice
Tr
oubleshooting T
ips
Installation Instr
uctions
Safety Instr
uctions
Operating Instr
uctions
Preparing to install the freezer.
Read these instructions completely and carefully.
Freezer Location
Your freezer should be conveniently located for
day-to-day use in a dry, well-ventilated room.
For most efficient operation, it should not be
located where the air temperature around the
freezer is higher than 110°F. (43°C.) or colder
than 32°F. (0°C.).
Be sure to install your freezer on a floor strong
enough to support it when it is fully loaded.
The freezer must be solidly positioned on the floor if
it is to function at its best. Shims may be used to
accomplish this wherever the floor is too uneven. If
the place selected for the freezer is damp or moist,
place 2 X 4’s (51 mm X 102 mm) under its entire
length to assure adequate support.
Clearances
Allow 3
″
(76 mm) on all sides for proper air
circulation.
Before you call for service…
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem Possible Causes What To Do
Freezer does not
Freezer is unplugged. •
Push the plug completely into the outlet.
operate
The fuse is blown/circuit •
Replace fuse or reset the breaker.
breaker is tripped.
Freezer starts Lid left open. •
Check to see if package is holding lid open.
too frequently
Too frequent or too long
lid openings.
Temperature control •
See
About the operation of your freezer.
set too cold.
Freezer operates
Lid left open. •
Check to see if package is holding lid open.
too long
Too frequent or too long
lid openings.
Temperature control •
See
About the operation of your freezer.
set too cold.
Inadequate air circulation •
See
Preparing to install the freezer.
space around cabinet.
Noisy operation Floor may be weak, causing •
Placing 2 X 4’s (51 mm X 102 mm) under the length of
or cabinet vibrates
freezer to vibrate when
the freezer will help support it and may reduce vibration.
compressor is on.
Cabinet is not positioned •
Adjust legs. See
Preparing to install the freezer.
Or use
solidly on floor.
shims for uneven floor.
10