GE EVT-Pro, Техническое руководство

Страница: 45 / 58

EVT-Pro Software – Ready to Test
Rev - 1.0 / Page 45 / 10/10/2012
There are 2 ways to start
a test. First, you can
simply start pumping.
When the laptop
registers an increase of
load it will start to record.
Second, you can press
the space key to start
recording. Note:
pressing the space bar is
the preferred method so
that fast occurring
events are not missed.
Always verify that the battery status is showing an actual
amount of charge. If the red "not connected" is displayed
check the pump battery. Data is not recorded if the pump
battery is drained or not connected.
Zero the load cell
by clicking here.
You only need to
zero before the first
test or if the bracket
is taken off the
valve.
This area shows
the test parameters
for the test...such
as max force, max
lift, expected set
pressure, functional
seat area is not
visible due to
proprietary rights.
Real time readouts
of the various
sensors.