4400-0024 enFlow Operator’s Manual EN Rev. T 05/12
Page 24 of 26
Appendix B: Glossary
enFlow IV Fluid/Blood
Warming System
The enFlow IV Fluid/Blood Warming System consists of three products:
the Warmer (No. 980100), the Controller (No. 980121), and the
Disposable Cartridge (No. 980200), which together form a system
designed to warm intravenous fluids and blood products helping
reduce hypothermic effects.
Warmer
(Model 100)
The Warmer is a small, lightweight, rugged fluid warmer that heats
blood, blood plasma, and intravenous fluids being delivered to the
patient’s body within seconds from 20 ºC to 40 ºC through a flow rate
range of KVO to 200 mL/min.
Controller
(Model 120)
The Controller displays a temperature readout in degrees C, as well as
containing a keypad, which controls the clock and the mute feature.
Additionally, it converts AC line power to 28 Volts DC, and is used as a
power source for the Warmer.
Disposable
Cartridge
(Model 200)
The Disposable Cartridge uses a sterile, single use component to be
used as an in-line component of an IV infusion set for the heating of
the fluids/blood being infused into the patient’s body.
Disposable
Cartridge with IV Extension
Set (Model 200)
The Disposable Cartridge with IV Extension Set product contains the
same Disposable Cartridge described above. In addition, it includes a
sterile, single use IV extension set.
Intravenous Fluids
Fluids such as Normal Saline, Dextrose, Dextron, Packed RBC’s
KVO
“Keep Vein Open” refers to an intravenous infusion rate defined as
approximately 2 mL/min (120 mL/hr).
LED
Light Emitting Diode
mL/min
Milliliters per minute
RBC’s
Packed Red Blood Cells
