About the other features.
26
Reset Filter
The red LED indicator under this key pad will
light every 6 months to reminder changing the
charcoal filter.
After replacing the charcoal filters, Hold the
Rest Filter
for 3 seconds to turn off the Red LED
indicator.
Charcoal Filter
The charcoal filter cannot be cleaned. It must
be replaced. Order Part No. WB02X11550 from
your GE supplier.
If the model is not vented to the outside, the
air will be recirculated through a disposable
charcoal filter that helps remove smoke and
odors.
The charcoal filter should be replaced when the
red LED indicator lights under the
Rest Filter
pad.
See “Optional Kits,” page 8, for more information
.
Reset
Filter
Hold 3 Sec
To Remove The Charcoal Filter
To remove the charcoal filter,
first disconnect
power at the main fuse or circuit breaker, or pull
the plug. Open the microwave oven door and
push the “Push” area on charcoal filter cover at
center of the grille. Press back on the top of the
filter with both hands until the filter lays down
almost horizontal. Lift the filter at the bottom until
it comes free of the tabs. Slide the filter down and
out.
