About the sensor features.
Popcorn
To use the
Popcorn
feature:
1
Place the package of popcorn in the center of teh
microwave.
2
Press
POPCORN.
The oven starts
immediately.
Your popcorn bag may get stuck and
stop rotating, but this will not effect to the
cooking performance. Do not open the door
even if the bag is not rotating.
How to Change the Automatic Settings
To reduce time by 10%:
Press 1 after the feature pad.
To add 10% to cooking time:
Press 9 after the feature pad.
If food is undercooked after the countdown, use
Cook
Time
for additional cooking time. We recommend 30
seconds and watch carefully.
Reheat
The
Reheat
feature reheats servings of
previously cooked foods or a plate of leftovers.
1
Press
REHEAT.
2
Using the cooking guide below, enter food
code. For example,
1
for Pasta.
3
Press
START/PAUSE.
The oven signals when
steam is sensed and the time remaining
begins counting down.
Do not open the oven door until time is counting
down. If the door is opened before time is
counting down 4 beeps are emitted while the
display will Scroll & Cycle “SENSOR ERROR “ until
CANCEL
is pressed. The sensor cook will be
cancelled as well. If the Door is opened during
the counting down, close it and press
START
immediately
.
After removing food from the oven, stir, if
possible, to even out the temperature. If the
food is not hot enough, use Cook Time to
reheat for more time. Reheated foods may
have wide variations in temperature. Some
areas may be extremely hot.
It is best to use
Cook Time
for these foods:
n
Bread products.
n
Foods that must be reheated covered.
n
Foods that need to be stirred or rotated during
reheating.
n
Foods calling for a dry look or crisp surface after
reheating.
How to Change the Automatic Settings
To reduce time by 10%:
Press 1 after the feature pad.
To add 10% to cooking time:
Press 9 after the feature pad.
Cooking Guide for Reheat Feature:
Code Entry
Food
1
Pasta
2
Pizza
3
Plate
4
Soup
17
Popcorn
Reheat