GE DISPOSALL GFC320N Скачать руководство пользователя

Страница: 4 / 48

49-5903-3

SAFETY

INFORMA

ION

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

If you are not familiar with electrical power and procedures, call a qualified electrician.

7KHSRZHUFRUGDQGRUFRQQHFWLRQVPXVWFRPSO\ZLWK
WKH1DWLRQDO(OHFWULFDO&RGH6HFWLRQDQGRUORFDO

codes and ordinances.

For Models Not Equipped with a Cord:

If your disposer does not come equipped with a cord,
you can connect it in two ways:
1. Attach a power cord, minimum 18” in length and

QRWWRH[FHHG´LQOHQJWK8VH*($3DUW1XPEHU
30;

or
2. Wire the disposer directly into the house current.

To Attach a Power Cord:

GROUNDING INSTRUCTIONS:

7KLVGLVSRVHUPXVW

be grounded to reduce the risk of electric shock in
the event of a malfunction or breakdown. Grounding
provides a path of least resistance for electric current.

7KLVGLVSRVHULVHTXLSSHGZLWKDFRUGKDYLQJDQ

equipment-grounding conductor and a grounding

SOXJ7KHSOXJPXVWEHSOXJJHGLQWRDQRXWOHWWKDWLV

properly installed and grounded in accordance with all
local codes and ordinances.

WARNING

Improper connection of the

equipment-grounding conductor can result in
a risk of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as to
whether the appliance is properly grounded.
NOTE:

'LVFRQQHFWHOHFWULFSRZHUWRGLVSRVHUFLUFXLW

EHIRUHLQVWDOODWLRQ7XUQWKHFLUFXLWEUHDNHUWRWKH2))

position or remove the fuse.
A. Connect the disposer to 110-120 Volt, 60 Hz AC

current only.

B. If a plug-in cord

is used, use
a three prong
plug. Ground
wire should be
attached to the
ground screw in
the bottom of the
disposer (end
bell).

&8VHDFDEOH

clamp strain relief
connector where
power cord enters
the disposer.

To Wire Your Disposer Directly into the House
Current:

GROUNDING INSTRUCTIONS:

7KLVGLVSRVHUPXVW

be connected to a grounded, metal, permanent wiring
system; or an equipment-grounding conductor must
be run with the circuit conductors and connected
to the equipment-grounding terminal or lead on the
appliance.

$,I\RXXVH%;FDEOH

7KHVHSURGXFWVDUHGHVLJQHGIRUKRXVHKROGXVH

2. Connect white wire to white lead of disposer with

a wire nut. Connect black wire to black lead of
disposer with a wire nut. Connect bare ground

ZLUHWRWKHJURXQGVFUHZ7KHJURXQGZLUHVKRXOG

be clamped and held by a strain relief.

'RQRWXVHDULJLGFRQGXLWIRUWKHZLULQJ

connection.

4. A dedicated acceptable motor switch, with the

off position marked, shall be provided for this

GLVSRVHUDWWKHWLPHRILQVWDOODWLRQ7KHVZLWFK

shall be mounted in sight of the disposer or the
sink opening
for the
disposer.

,I%;FDEOHLVQRW

used, provide a
separate ground
wire to nearest
reliable ground,
using the screw in
the end bell for the
ground wire.
B. If your power

supply does not
include a ground wire, you must provide one unless
metal cable is used. Attach a copper wire securely
to disposer ground screw and attach other end of

ZLUHWRDUHOLDEOHJURXQG8VHRQO\8/DSSURYHG

ground clamp. If plastic pipe is used in your home,
a qualified electrician should install a proper ground.

CONNECTING ELECTRICITY (Cont)

READ AND SAVE THESE INSTRUCTIONS

7UDFHOHDGFRQQHFWHG

to this blade and attach

that lead to white wire

on disposer

NOTE:

When viewing face of

electrical plug with grounding

pin at top, the larger left blade is