Modifications reserved
Page 9/10
PRD_LPS_31E_8K0_20K_1GB_V021.doc
Product Description
LP 31 Series
5. INTERFACING
5.1 ComConnect (RS232 Interface)
Located at the back of the unit, the ComConnect is a plug-in interface port (9-pin, Sub-D, male), which
enables advanced communication between the UPS and the computer (interface kit required).
The microprocessor controlled and galvanically isolated ComConnect sends information concerning
power levels and UPS condition to the computer or network interface.
In the event that batteries are near exhaustion, it sends commands for unattended controlled shutdown
of computer systems.
The ComConnect can also receive UPS shutdown signals from computers or network interface.
When signals are sent to the computer, a written message can appear on the screen to inform the user.
Monitored conditions include:
•
mains
voltage
availability;
•
discharge level of batteries;
•
temperature of the batteries;
•
interactive control- and diagnostic information for stand-alone and network systems.
Interface kits (cables and software) are available for most commonly used network operating systems,
including Novell, UNIX, VMS, Banyan Vines, Windows 3/95/98/NT, Apple, IBM LANserver, IBM AS/400.
Remote servicing through a modem (external) is possible with
GE
Victron SerVICe Software.
We strongly recommend to use only original
GE
software products in combination with the
ComConnect interface port.
We only guarantee proper operation of original
GE
products.
The ComConnect cable should be shielded, connect the cable shield to the computer cabinet only.
For specific information on
GE
's connectivity products please contact your dealer.
Figure 6 - ComConnect port
No. pin
function:
1
RS232 input (UPS shutdown)
2 RS232
output
4 Windows’95
Plug&Play
5 Common
The ComConnect Port conforms to EN 50091 and is independent of the UPS function.
