GE DASH 3000 V5 Скачать руководство пользователя страница 82

Страница: 82 / 105

TAB
TRIM

COVER &
NON-TAB
TRIM

TAB
TRIM

COVER &
NON-TAB
TRIM

Refer to Operators Manual for Any Specific Questions.

For Customer Support or Clinical Helpline,
Call: 1-800-558-7044.

When troubleshooting problems,

ALWAYS

rule out that the easiest solution is

NOT

the cause of the problem.

■

Reattempt connectincting the Dash Monitor to the Dash Port 2.

■

Verify the power, network, display, and auxiliary device cables are securely connected to the equipment.

■

Verify the network, display, and auxiliary device cables are inserted into the correct equipment connectors. (See Back View card).

■

Verify the docking station’s security lever is in the far left position when a monitor is connected to the docking station.
(See “Establish the Monitor’s AC and Communication Links).

Troubleshooting

PROBLEM

SOLUTION

CAUSE

The docking station’s amber-colored
communication indicator

flashing.

Use a monitor that is fully compatible with the
docking station.

The monitor does not support the remote
display and auxiliary two communication
links.

The docking station’s communication
indicator

IS NOT

illuminated.

Use the Dash 2000 monitor that has the
communication PCB installed.

The Dash 2000 monitor does not have the
communication PCB required to interface
with the docking station.

The monitor

IS NOT

communicating with the

Unity Network.

■

The docking station’s green-colored
communication indicator

illuminated.

1. Disconnect the network cable from the

docking station.

2. Remove the monitor from the docking station

and connect the network cable to the monitor.

3. If the monitor cannot view a remote bed from

the network, replace the network cable.

4. If the monitor can view a remote bed from the

network, contact GE Service.

The network cable is damaged.

Содержание DASH 3000 V5










































































































Результаты поиска

Содержание DASH 3000 V5

Отзывы:

Бренды по названию

Популярные бренды

GE DASH 3000 V5, Краткое руководство пользователя

Результаты поиска

Содержание DASH 3000 V5

Отзывы:

Бренды по названию

Популярные бренды