GE DASH 3000 V5 Скачать руководство пользователя страница 14

Страница: 14 / 105

TAB
TRIM

COVER &
NON-TAB
TRIM

TAB
TRIM

COVER &
NON-TAB
TRIM

Rover-Combo

■

To Discharge a Patient:

•

Remove all ECG leads

from the patient.

•

Select

MORE MENUS

•

Select

ADMIT MENU

•

Select

DISCHARGE

PATIENT

•

Turn the Trim Knob to move

the cursor in front of the

desired discharge option and

press to select:

–

Return:

Exit to Main

Menu.

–

Monitor:

Discharges only

the bedside monitor.

–

Telemetry:

Discharges

patient from telemetry.

–

Both:

Discharges both the

monitor and telemetry.

NOTE:

When discharging ONLY the bedside monitor, all stored

vital sign data will be deleted. The only data which remain
available will be: HR, ST, PVC, and Alarm Histories.

•

A message

DISCHARGED

and

ALL ALARMS OFF

will

appear on the display when

the monitor is in a discharged

mode.

•

Push the Display On/Off

button to turn the display off.

NOTE:

It is recommended to leave the network cable plugged

in and the Dash display on for two minutes following
discharge.

•

Store the monitor with the AC

power cord plugged in and

the display off.

Содержание DASH 3000 V5










































































































Результаты поиска

Содержание DASH 3000 V5

Отзывы:

Бренды по названию

Популярные бренды

GE DASH 3000 V5, Краткое руководство пользователя

Результаты поиска

Содержание DASH 3000 V5

Отзывы:

Бренды по названию

Популярные бренды