GE CyberDome II, Руководство по установке

Страница: 35 / 56

Chapter 4
Installing the camera assembly and dome
27
Setting the camera’s address
The main board of the camera assembly contains a multiposition DIP switch ( Figure 16 ). These DIP switches
are used to assign the camera a site address number.
Figure 16. Location of site address DIP switch
To set the DIP switches to indicate a site number, do the following:
1. Using Table 7 , determine the DIP switch position values that add up to the site number.
2. Set the switches that correspond to those values to the ON position. See Figure 17 on page 28 for an
example.
Table 7. Dip switch positions and equivalent values
DIP switch position number
1 2 3 4 5 6 7 8 9 10 11 12
Equivalent value
1 2 4 8 16 32 64 128 256 512 -- --
DIP switches
Protocol switch