GE CyberDome II, Руководство по установке

Страница: 34 / 56

CyberDome II
Installation Manual
26
Set the protocol
CyberDome II can use different protocols for communication. To use a protocol, you must set the DIP switches
according to the protocol you want to use (
Figure 15 ). Use the information in Table 6 to set the DIP switches
for the desired protocol.
Figure 15. Protocol switch
CyberDome II stores all programming information settings in nonvolatile memory in both the housing and in the PTZ. If the
protocol switches are in any other configuration and the two memories are different, you will see
Memory flashing onscreen, and
when you first log onto the menu system, you will be asked which settings you would like to use.
Table 6. Protocols
Protocol Switch position (1 = on, 0 = off)
Automatic selection
a
a. The Automatic selection will automatically determine only the GE protocols (Digiplex, Impac, and ASCII).
00000
Digiplex 4800 10000
Impac 9600 01000
ASCII 9600 11000
Pelco D Autobaud 00100
Pelco P 4800 10100
Ultrak 9600 01100
BBV 01110
Copy settings from PTZ to housing 01111
Copy settings from housing to PTZ 11111
Protocol switch