GE Combination GFQ14, Руководство пользователя и инструкции по установке

Страница: 27 / 32

49-3000230 Rev 0
27
Troubleshooting Tips... Before you call for service
TROUBLESHOOTING TIPS
Problem Possible Cause What To Do
Clothes take
too long to dry
Improper sorting Separate heavy items from lightweight items (generally, a
well-sorted washer load is a well-sorted dryer load).
Large loads of heavy
fabrics (like beach towels)
Large, heavy fabrics contain more moisture and take longer to
dry. Separate large, heavy fabrics into smaller loads to speed
drying time.
Non-venting unit Condensing dryers usually take longer to dry than a vented
dryer.
Controls improperly set Match control settings to the load you are drying.
Blown fuses or tripped
circuit breaker
Replace fuses or reset circuit breakers. Since most dryers use
2 fuses/breakers, make sure both are operating.
Overloading/combining
loads
Do not put more than one washer load in the unit at a time.
Underloading If you are drying only one or two items, add a few items to
ensure proper tumbling.
The Dry
dryness level
was chosen
but load is still
damp
Load consists of a mixture
of heavy and light fabrics
When combining heavy and light fabrics in a load, choose
Auto Extra Dry.
Control
buttons not
responding
Controls accidentally put in
service mode
Press Start/Pause.
Controls accidentally put in
lock mode
Hold the Soil and Temp buttons for 3 seconds to unlock the
unit.
Controls performed an
incorrect operation
Reset the in-house breaker.
No numbers
displayed
during cycle,
only lights
Unit is continuously
monitoring the amount of
moisture in the clothes
This is normal. When the unit senses a low level of moisture in
the load, the unit will display the dry time remaining.
Time
Remaining
jumped to a
lower number
The estimated time may
change when a smaller load
than usual is drying
This is normal.
Cannot make a
selection and
the unit beeps
twice
The dryness Level, Temp or
option that you are trying to
select is incompatible with
the chosen dry cycle
This is normal.
Unit is running
but 00 is
displayed
in Time
Remaining
The Ext Tumble option was
chosen
This is normal. During extended tumbling, the time remaining
is not displayed. The extended tumbling option lasts
approximately 60 minutes.