BEFORE YOu BEgIN
Installation
Zoneline Air
Instructions
Conditioners
Read these instructions completely and carefully.
•
IMPORTANT –
Save these instructions for
local inspector’s use.
•
IMPORTANT –
Observe all governing
codes and ordinances.
•
Note to Installer –
Be sure to leave these
instructions with the owner.
•
Note to Owner –
Keep these instructions for
future reference.
•
Proper installation is the responsibility of the installer.
•
Product failure due to improper installation is not
covered under the Warranty.
Questions? Call 800.GE.CARES (800.432.2737)
or
Visit our Website at:
GEAppliances.com
IMPORTANT ELECTRICAL
SAFETY—READ CAREFuLLY
CAuTION:
• Follow the National Electrical Code (NEC) or local
codes and ordinances.
• For personal safety, this Zoneline must be properly
grounded.
• Protective devices (fuses or circuit breakers)
acceptable for Zoneline installations are specified
on the nameplate of each unit.
• Do not use an extension cord with this unit.
• Aluminum building wiring may present special
problems—consult a qualified electrician.
• When the unit is in the OFF position, there is
still voltage to the electrical controls.
• Disconnect the power to the unit before
servicing by:
1 Removing the power cord (if it has one) from
the wall receptacle.
OR
2 Removing the branch circuit fuses or turning
the circuit breakers off at the panel.
Phillips screwdriver
TOOLS YOu WILL NEED
11
ZONELINE COMPONENTS
appearance may vary.
Exterior grille/louver**
*
* Shipped with the Zoneline unit
** Check the “Essential Elements” list on the unit located on front of the base pan
Wall case**
Zoneline unit
Room cabinet*
Power supply kit**
