17
C
ALLER
ID E
NABLE
/D
ISABLE
This setting allows you to enable or disable the Caller ID feature
independently for each line. The ON setting allows the unit to detect and
display Caller ID records for the corresponding line. The OFF setting
disables the Caller ID function for a particular line.
1. Press the MENU/EXIT button.
2. Use the REVIEW up or down arrow button to scroll to
ADVANCE
FEATURE.
3. Press the SELECT button.
4. Use the REVIEW up or down arrow button to scroll to
SET CALLER ID.
5. Press the SELECT button. The Caller ID
ON or OFF settings for all lines
show in the display.
6. Press the REVIEW up or down button to move cursor to the desired line.
Press SELECT button to select line to change settings.
7. Use the REVIEW up or down arrow button to select
Caller ID ON or OFF.
Press the SELECT button to confirm.
8. Repeat steps 6 and 7 for each telephone line.
9. When finished, press the MENU/EXIT button. If you want to start over,
press MENU/EXIT to return to
SET CALLER ID menu.
NOTE:
You may press the MENU/EXIT button at any step to change the
options or exit the current menu.
I
NCOMING
C
ALL
T
ONE
E
NABLE
/D
ISABLE
When you are using the phone on one line and another call comes in on
another line, you will hear an incoming call tone (two beeps for three ring
cycles) at the handset, speakerphone, or headset. To turn it on or off:
1. Press the MENU/EXIT button.
2. Use the REVIEW up or down arrow button to scroll to
ADVANCE
FEATURE.
3. Press the SELECT button.
