36
Disassembly of the parts (Indoor unit)
WARNING
1. To remove the Grille from the
Chassis.
•
Set the up-and-down air discharge louver to open position
(horizontally) by finger pressure.
•
Remove the securing screws at the bottom of grille.
•
To remove the grille, pull the lower left and right side of the
grille toward you (slightly tilted) and lift it straight up.
2. To remove the Control Box
•
Remove the thermistors. One from the thermistor holder
on evaporator, the other from pipe holder.
•
Remove step motor connector, motor connector from main
P.C.B.
•
If necessary, disconnect DC power supply cord from pillar
terminal, and remove the cord clamp screw. (Be careful not
to lose the cord clamp when reassembling).
Chassis
Grille
Remove Screws (3 places)
Connectors
Cord clamp
Thermistors
DC power supply cord
(Connecting cable)
Pillar terminal
DISCONNECT POWER BEFORE SERVICING
IMPORTANT - RECONNECT ALL GROUNDING DEVICES
All parts of this appliance capable of conducting electrical
current are grounded. If grounding wires,
screws, straps, clips, nuts or washers used to
complete a path to ground are removed for service,
they must be returned to their original position and
properly fastened.
Содержание AS0CD09 Series
