GE AS0CD09 Series, Техническое обслуживание руководство

Страница: 30 / 72

28
Example:
1) Make a hole appropriate for the passage of connection
cable through cap.
(for low voltage line).
2) Pass the connecting cable through the hole.
3) Properly connect the cable on the terminal block.
4) Fix the connection cable with clamp cord provided on the
unit.
5) Wind the vinyl tape round the connecting cable for
sealing between the surface of the connection cable and
cap.
6) Mount the taped part of cable on the cap.
7) Finally, mount the holed cap with the wound cable on the
conduit panel.
How to connect wiring to the terminals
For solid core wiring (or F-cable)
(1) Cut the wire end with a wire cutter or wire-cutting pliers,
then strip the insulation to expose the solid wire about 5/
16”.
(2) Using a screwdriver, remove the terminal screw(s) on
the terminal plate.
(3) Using pliers, bend the solid wire to form a loop suitable
for the terminal screw.
(4) Shape the loop wire properly, place it on the terminal
plate and tighten securely with the terminal screw using a
screwdriver.
For strand wiring
(1) Cut the wire end with a wire cutter or wire-cutting pliers,
then strip the insulation to expose the strand wiring about 3/
8”
(2) Using a screwdriver, remove the terminal screws(s) on
the terminal plate.
(3) Using a round terminal fastener or pliers, securely clamp
each stripped wire end with a round terminal.
(4) Position the round terminal wire, replace and tighten the
terminal using a screwdriver.
Connecting method of the connecting cable
Loose wiring may cause terminal to over-
heat or result in unit malfunction. A fire
hazard could also exist. Therefore, be sure
all wiring is tightly connected
.
WARNING
Clamp cord
Hole
(for low
voltage line)
Taping
(for sealing)
Cap
(resuse)
Low voltage line
(connecting cable)
Conduit panel
Power supply line
Cap
(remove)
Lock nut
Terminal block
Solid wire
Loop
Insulation
Stranded wire
Round
terminal
Strip 3/8"
Screw with
special washer
Round terminal
Terminal plate
Wire
Screw with
special washer
Round terminal