7
GEAppliances.com
Dry Temp
You can change the temperature of your dry cycle.
ANTI-BACTERIAL
This option may only be used with
COTTONS
or
MIXED LOAD
cycles. This option reduces certain types of bacteria by
99.9%, including:
Staphylococcus aureus, Pseudomonas aeruginosa
and
Klebsiella pneumoniae
*. The anti-bacterial
process occurs when high heat is used during a portion of this drying cycle.
NOTE: Do not use this cycle on delicate fabrics.
* The Anti-Bacterial Cycle is Certified by NSF International (formerly National Sanitation Foundation) to NSF Protocol
P154
Sanitization Performance of Residential Clothes Dryers.
HIGH
For regular to heavy cottons.
MEDIUM
For synthetics, blends and items labeled permanent press.
LOW
For delicates, synthetics and items labeled Tumble Dry Low.
EXTRA LOW
For lingerie and special-care fabrics.
START/PAUSE
Press to start a dry cycle. If the dryer is running, press it once and it will pause the dryer. Press it again to resume the dry
cycle.
My Cycle
(on some models)
Set up your favorite combination of settings and save them here for one touch recall. These custom
settings can be set while a cycle is in progress.
To store a MY CYCLE combination of settings:
1
. Select your drying cycle.
2.
Change
DRY TEMP
and
SENSOR DRY
settings to fit your needs.
3.
Select any drying
OPTIONS
you want.
4.
Press and hold the
MY CYCLE
button for 3 seconds to store your selection. A beep will sound the button will light up, and
the unit will display “My cycle is now programed with the current cycle settings”.
To recall your stored MY CYCLE combination:
Press the
MY CYCLE
button before drying a load. The light in the center of the button will light up when
MY CYCLE
is selected.
To change your stored MY CYCLE combination:
Follow Steps 1–4 in
“To store a MY CYCLE combination of settings.”
Display
“CLEAN LINT FILTER” (message)
This message appears periodically. It is only a reminder.
5
ENTER
S
PECIALTY
C
YCLES
SPECIALTY CYCLE 1:10
Comforters
Delay Time 1:00
Clean Lint Filter
0
Special Cycle Status OR
Dryer Rack OR Timed Dry
Est. Cycle Time
OR Time to Dry
Delay Time
Status
Lint Filter Status
Screen
DELAY TIME
S
TORE
M
Y
C
YCLE
M
Y
C
YCLE
After the
POWER
button is pressed, the
CLEAN
LINT FILTER
message could appear if the
previous cycle was not finished. This message
will disappear after the
START
button is pressed.
Even though you have already cleaned the
filter (before the POWER button was pressed),
the
CLEAN LINT FILTER
message will still be
displayed until the
START
button is activated.
6
7
8
Downloaded from
www.Manualslib.com
manuals search engine
