FINAL SETUP
Installation Instructions
LEVEL THE DRYER
Stand the dryer upright near the final location
and adjust the four leveling legs at the corners to
ensure that the dryer is level from side to side and
front to rear.
Lower
Raise
ATTACH SERIAL CABLE
Attach the serial cable for washer and dryer
connection to the serial port on the back of the
dryer.
Attach the other end of the cable to the washer
before pushing the washer into its final position.
PLUG DRYER IN
Ensure proper
ground exists
before use.
Rear of
Dryer
1
2
3
Serial Port
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of
least resistance for electric current. This appliance
is equipped with a cord having an equipment-
grounding conductor and a grounding plug.
The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
4
DRYER STARTUP
Press the
POWER
button.
NOTE:
If the dryer has been exposed to temperatures
below freezing for an extended period of time, allow
it to warm up before pressing
POWER
. Otherwise,
the display will not come on.
The dryer is now ready for use.
5
SERVICING
WARNING –
Label all wires prior to
disconnection when servicing controls. Wiring
errors can cause improper and dangerous
operation after servicing/installation.
For replacement parts and other information, refer
to the back cover for servicing phone numbers.
32
Downloaded from
www.Manualslib.com
manuals search engine
