GE AHM18DP, Руководство пользователя и инструкции по установке

Страница: 7 / 32

BEFORE YOU BEGIN
Read these instructions completely
and carefully.
‡
IMPORTANT
³6DYHWKHVHLQVWUXFWLRQV
for local inspector’s use.
‡
IMPORTANT
³2EVHUYHDOOJRYHUQLQJ
codes and ordinances.
‡ Note to Installer – Be sure to leave these
instructions with the Consumer.
‡ Note to Consumer – Keep these instructions for
future reference.
‡ Skill level – Installation of this appliance requires
basic mechanical skills.
‡ Completion time – Approximately 1 hour
‡ :HUHFRPPHQGWKDWWZRSHRSOHLQVWDOO
this product.
‡ 3URSHULQVWDOODWLRQLVWKHUHVSRQVLELOLW\
of the installer.
‡ 3URGXFWIDLOXUHGXHWRLPSURSHULQVWDOODWLRQLVQRW
covered under the Warranty.
‡ <RX0867XVHDOOVXSSOLHGSDUWVDQGXVHSURSHU
installation procedures as described in these
instructions when installing this air conditioner.
Installation
Air Conditioner
Instructions
Some models require a 115/120-volt AC,
60-Hz grounded outlet protected with a
15-amp time-delay fuse or circuit breaker.
The 3-prong grounding plug minimizes the
possibility of electric shock hazard. If the wall outlet
you plan to use is only a 2-prong outlet, it is your
responsibility to have it replaced with a properly
grounded 3-prong wall outlet.
Some models require 230/208-volt AC,
protected with a time-delay fuse or circuit
breaker. These models should be installed on
their own single branch circuit for best
performance and to prevent overloading
house or apartment wiring circuits, which
could cause a possible fire hazard from
overheating wires.
ELECTRICAL REQUIREMENTS
CAUTION:
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord.
Do not change the plug on the power cord
of this air conditioner.
Aluminum house wiring may present special
SUREOHPV³FRQVXOWDTXDOLILHGHOHFWULFLDQ
7
TOOLS YOU WILL NEED
Ruler or tape measure Pencil
Level Scissors or knife
Power cord includes a current interrupter device. A
test and reset button is provided on the plug case. The
device should be tested on a periodic basis by first
pressing the TEST button and then the RESET button
while plugged into the outlet. If the TEST button does
not trip or if the RESET button will not stay engaged,
discontinue use of the air conditioner and contact a
qualified service technician.
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: GEAppliances.com
Phillips head screwdriver
Flat-blade screwdriver
Drill with 1/8” bit
Adjustable Wrench