4
About the controls on the dehumidifier.
Controls
Fan Speed
The fan control adjusts the fan speed.
Set the fan control to
HIGH
for maximum
moisture removal. When the humidity has
been reduced and quiet operation is
preferred, set the fan control to
LOW.
Humidity Control
When you first use the dehumidifier, turn
the humidity control to
5
or
6
. If you still
have moisture, turn the humidity control
to a higher setting.
CONTINUOUS
is the highest setting.
When excess moisture and dampness odors
are gone, adjust the control to a lower
setting. Use the dehumidifier as long as
excess moisture is present.
Other Features
BUCKET FULL Light
Glows when the bucket is ready to be emptied, or when the bucket is removed or not replaced in
the proper position.
Auto Shut Off
The Water Level Control Switch shuts off the dehumidifier when the bucket is full, or when the
bucket is removed or not replaced in the proper position.
Auto Defrost
When frost builds up on the cooling coils, the compressor will cycle off until the
frost disappears. The fan continues to run.
DR
YE
R
HUMIDITY
CONTROL
CONTINUOUS
OFF
FAN
SPEED
BUCKET FULL
Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
Troubleshooting T
ips
Care and Cleaning
Safety Instructions
Operating Instructions
