GE ADTS552F Скачать руководство пользователя страница 75

Страница: 75 / 153

OOLS

K0553 Revision D

[EN] English

To view the status information for the ADTS Touch or ADTS:

Touch the image on the screen for the item of interest (1) or (2). Information related to that

item is displayed.

Touch the displayed information panel to close the panel.

- Software installed

Information about the installed software and version numbers.

- History

Opens the “History” sub-menu. The “History” sub-menu contains the following items:

- Calibration history:

shows the “Calibration history” for:

- Ps:

Sensor Ps history.

- Pt:

Sensor Pt history.

- Software history:

shows the “Software history” for:

- ADTS Touch main code:

shows the software versions and installation dates.

- ADTS Touch OS build:

shows the OS versions and installation dates.

- ADTS Touch boot ROM:

shows the boot ROM versions and installation dates.

- Hardware history:

if applicable, information relating to any hardware fitted.

- Message history:

shows the main event log for activities such as; switching on, error massages

and codes, and system status changes.

- Summary

Shows relevant information relating to the unit, including:

- ADTS Touch serial number.

- ADTS Touch main code.

- ADTS Touch OS build.

- ADTS Touch boot ROM.

- Area of use.

- Bluetooth

- Real Time Clock.

- ADTS Product Code.

- ADTS serial number.

- ADTS main code.

Содержание ADTS552F


























































































































































Результаты поиска

Содержание ADTS552F

Отзывы:

Похожие инструкции для ADTS552F

Бренды по названию

Популярные бренды

GE ADTS552F, Руководство пользователя

Результаты поиска

Содержание ADTS552F

Отзывы:

Похожие инструкции для ADTS552F

Бренды по названию

Популярные бренды