30
350 FEEDER PROTECTION SYSTEM – QUICKSTART GUIDE
MECHANICAL INSTALLATION
CHAPTER 2: INSTALLATION
Figure 2-6: Depth Reducing collar (optional)
Panel mounting with depth reducing collar:
1.
Mount the collar of required depth (1.375” or 3”) to the unit (captive or non-drawout)
using 4 screws (see above).
2.
Mount the combination of unit and collar to the panel using 4 screws as shown above.
Figure 2-7: Mounting tabs (optional)
1.
From the front of the panel, slide the empty case into the cutout until the bottom tab
clicks into place (see above).
2.
From the rear of the panel screw the case into the panel at the 8 screw positions
shown above.
BOTTOM TAB
“V” TABS
