GE 33712, Инструкция по эксплуатации

Страница: 11 / 29

11
Using Your Remote
tv
1. Press and hold down the
SETUP
button on the remote until the red
light on the remote control turns on.
Release the
SETUP button. The red
light will remain on.
2. Press and release the desired device
button (
TV, b-ray, aux, cble, strm,
aud) you would like the code for.
3. Press and release the
ENTER button.
4. Press and release the
#1 button.
Count the number of times the
remote light flashes. This is the
number corresponding to the first
digit of the code. Repeat the process
by pressing the
#2, #3 and #4
buttons for the remaining digits.
5. Press and release the
ENTER button
to exit this mode.
1. Press and hold down the
SETUP
button on the remote until the red
light on the remote control turns on.
Release the
SETUP button. The red
light will remain on.
2. Press and release the
MUTE button.
3. Press and release the number
#0
button. The red indicator light will
flash twice.
Code Identification
Reset to Factory Settings