6
“N
O
W
ORRY
” B
ATTERY
B
ACKUP
This clock phone is equipped with a memory holding
system that can be powered with a customer-installed
9-volt alkaline battery (not included).
When power is interrupted, or AC line cord is
unplugged, the battery will power the clock to keep track
of time and alarm settings programmed into memory.
When on battery power, the digital display will not light;
however, should wake time occur during the power
interruption, the alarm will sound if remaining battery
power is adequate. Normal operation will resume after
AC power is restored.
Install battery as follows:
1. Remove the battery cover located on the bottom of
the base.
2. Connect a fresh 9-volt alkaline battery (not included).
The large and small contacts on the battery clip and
the battery will interlock. Once connected, place the
battery inside the battery compartment.
3. Replace the battery cover.
P
OWERING
U
P
-
-
+
+
Battery clip
Battery
Battery compartment
