9
4. Remove the handset from the cradle and set aside. Turn the base over
and align the four slots on the bottom of the base with the four hook
tabs on the bracket.
5. Insert the hook-tabs into the slots and push upwards until the bracket
snaps securely into place.
6. Plug the telephone line cord into the phone jack on the back of the base
and into a modular phone jack.
7. Slip the mounting holes over the wall plate posts and slide the unit
down firmly into place. (Wall plate not included.)
8. Place the handset in the cradle.
NOTE :
If desired, gather the extra telephone line and power supply cord
together, fasten with a wire tie, and store inside the wall mounting bracket.
NOTE :
The phone automatically defaults to touch-tone dialing. To change to
pulse (rotary) dialing, see “Tone/Pulse Dialing.” If you don’t know which type
of service you have, check with the phone company.