19
Handset Setup
There are five programmable menus available: Language,
Local Area Code, Ringer Tone, Tone/Pulse and Factory
Default. When you program these settings, make sure the
phone is
OFF
(not in talk mode). Pressing the TONE*/exit
button will remove you from the menu selection process
without changing the feature you are in.
Display Language
1. Press the flash/program button until
1ENG 2FRA 3ESP
shows in the display.
. Use the CID/vol (
5
or
6
) button or the handset
number pad to select 1 (English), (French), or
(Spanish). The default setting is
1ENG.
. Press the flash/program button to confirm and to
advance to the next menu feature.
Local Area Code
If you enter your local -digit area code in the area code
menu, your local area code does not display on the
Caller ID (CID) list. Instead, you only see the local 7-digit
number. Calls received from outside your local area code
will display the full 10-digit number.
1. Press the flash/program button until
AREA CODE - - -
shows in the display. The default setting is - - -.