4
CAUTION:
Plug the adaptor to the socket outlet that near the equipment
and shall be easily accessible. Use only the
Thomson Telecom
power
supply that came with this unit. Using other power supplies may
damage the unit.
Connecting the charging station
Insert the power plug in the socket on the rear side of the charging
station. Insert the power plug at the other end in the power outlet. The
charging station is now ready to operate.
AC power outlet
Getting Started
z
Install and Charge the Battery Pack
Insert two pieces AAA batteries in the compartment, ensuring correct
polarity and close the compartment.
z
Place the handset in the base station to charge for 14 hours prior
for first use. If you don’t properly charge the phone, battery
performance will be compromised.
If batteries are empty or newly installed into battery
compartment, handset LCD will not has any display and the
handset will not response to any key. Handset is then required to
put back on Base Station/Charger cradle to charge. Handset
cannot be used until 15 minutes charged. Handset name and
aerial icon appear. If handset does not charged full before use,
handset may emit battery low alert tone and battery level
indicator shows empty.
Features
We are very pleased that you have purchased this highly sophisticated,
cordless telephone which is equipped with the following features:
z
Digital cordless telephone complying to DECT* standards
z
10 MMI menu language
z
Teleconference
z
Call forwarding
z
Internal, free communication between handsets
z
Prefix dialing
z
Automatic call answering on/off
z
Call log function with caller list for 20 numbers or names from
phone book (network dependent)
Warning
:
The handset does not work and damaged if the
wrong batteries are inserted.
Use Only Rechargeable batteries supplied (charge at least 14
hours before use).
Do Not use Alkaline or Non Rechargeable batteries.
