15
PROBLEMS CAUSES
SOLUTIONS
The battery is not
sufficiently charged.
Charge the battery for
14 hours.
Registration not
work.
Handset and base
station were not
prepared for
registration.
Unplug and then plug in
the power adaptor.
No display.
The battery has not
been charged.
Charge the battery or
replace them.
No reactions to
keystroke.
The keypad is locked.
Press
key longer
than 2 seconds.
The handset is outside
the base station range.
Move closer to the base
station.
The handset is not
registered.
Register the handset (see
Registering Handset).
No radio
connection to the
base station:
blinking!
The base station does
not work.
Unplug and then plug
the power adaptor to the
power outlet (220-230V
AC / 50 Hz) and the
other end into the power
jack on base bottom.
Environment
Used equipment and used handset batteries must be disposed of in
compliance with current environmental protection regulations. You
should return them to your reseller or dispose of them at an approved
recycling centre.
Do not attempt to open the batteries, as they contain chemical
substance. In the event of leakage, avoid contact with the skin, eyes
and mouth. In the event of contact, rinse the affected part for several
minutes in running water. Clean the product with absorbent paper or
a dry cloth and contact your reseller for replacement batteries.
“WEEE” weight: 0.447Kg
