10
Store Entries
z
Press
key until the PHONE BOOK menu appears and press
“Int/ok” key.
z
Press
or
key to select “NEW ENTRY” and press
“Int/ok” key.
z
Enter number (max. 25 digits) and press “Int/ok” key when
finished.
z
Enter name (max. 10 characters) and press “Int/ok” key when
finished.
z
Select the ringing tone with
or
key and press
“Int/ok” key when finished.
z
“MEM FULL” appear stand for memory full.
z
If a VIP ring is assigned for that entry, a digit ‘
’ will be
shown in front of the name during the incoming call or
browsing “MEM FULL” appear stand for memory full.
Or Store the number from the Pre - dialing mode
z
To store a phone number from the Pre-dialing mode (when a
phone number is entered during Standby mode before pressing
the
key) to the phonebook, first press
key, follow by
press “Int/ok”. Then, the user will be prompted to enter the
name. The Entry procedure will be same as above.
List Entries / Edit Entries / Delete Entries
z
Press
key until the PHONE BOOK menu appears and press
“Int/ok” key.
z
Press
or
key to select submenu and press “Int/ok”
key.
z
List Entry: Press
or
key to scroll.
Or
z
Edit Entry: Press
or
key to scroll. Press “Int/ok” key
to start Number edition and press “Int/ok” key again to start
Name edition. Press “Int/ok” key to confirm. Select the ring
tone with
or
key and press “Int/ok” key.
Or
z
Delete: Press
or
key to scroll, press “Int/ok” key.
Or
z
Delete All: Press “Int/ok” key 2 times or press “
C
” to cancel.
Note:
Press “
C
” key to delete digit. Press and hold “
C
” key to EXIT.
Handset Settings
Changing the Ringing Volume
z
Press
key until the HANDSET menu appears and Press
“Int/ok” key three times.
z
Press
or
key to select the required volume(from 0 to
5 levels) and Press “Int/ok” key.
z
Note: The ringer volume can be heard at different volumes. If
the ringer symbol appears as non dotted line, the ringing
volume will be switched to OFF.
Changing the Ringer Melody (external /
internal)
z
Press
key until the HANDSET menu appears and Press
“Int/ok” key twice.
z
Use
or
key to select the required submenu (EXT
RINGER or INT RINGER) and press “Int/ok” key.
z
Use
or
key to select the required melody (1-10) and
press “Int/ok” key to confirm.
