13
INSTALLING THE LIGHT KIT
1.
Remove 1 of the 3 mounting plate
screws (O) from the mounting plate
of motor assembly and loosen the
other 2.
Fan Installation
3.
Remove the 3 LED light kit mounting screws
(P) from the metal housing (F), and save for
later use.
O
G
P
F
4.
5.
Securely attach shade (H) by twisting
clockwise onto the metal housing (F).
Note: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at fuse box.
Turning power off using the fan switch is not sufficient to prevent electric shock.
F
9-pin connector
F
H
2.
Guide the 9-pin connector through
the center hole on the metal housing
(F). Raise the metal housing (F) up to
the mounting plate, position keyhole
slots around the mounting plate
screws (O) and twist clockwise.
Insert the mounting plate screw (O)
that you had previously removed.
Tighten all screws.
Attach the 9-pin connectors from the LED light kit (G) and
motor assembly. Tuck the connections neatly into the LED
light kit (G), align the 3 screw holes on LED light kit (G) to
the holes on metal housing (F). Insert the 3 LED light kit
mounting screws (P) that you had previously removed.
Tighten all screws.
Note:
Both connectors are polarized and will only fit
together one way. Make sure the connectors are properly
aligned before connecting them. Incorrect connection
could cause improper operation and damage to the product.
F
P
