GE 1111H, Руководство пользователя

Страница: 36 / 97

October 2007
3-2 Operation
Operating the OptiSonde
The parameters chosen during programming are displayed
numerically in the middle of the screen. For programming, see
Chapter 4. A typical OptiSonde display screen is shown in Figure 3-1
below. The system status and heating/cooling indicator (small arrow)
are shown in the upper right, and the balance indicator is shown in the
lower left.
Figure 3-1: Typical OptiSonde Display Screen
To control the sensor, press the
ENT
key. (If the OptiSonde keys are
locked, press the
ESC
key, followed by the
ENT
key, and then press the
ESC
key again.) The Function Control screen appears, as shown in
Figure 3-2 below. Use the four arrow keys to select the desired
function
Figure 3-2: Function Control Screen
Menu: x Auto Cycle
e
mbar
6.0179
T
a
°C
+25.09
14:33
Select Function:
_
PACER AUTO
`
HEAT
COOL