Chapter 2. Instrument Setup
52
DMS Go Operator’s Manual
2.3.3e Entering a New Activation Code for Options (CONFIG - CODE)
If you purchase a specific software option, GE will provide a specific activation code. These specific options include TOPCOAT and
AUTO-V, Extended Data Recorder, and USM Go Mode. Activation codes matched to your
DMS Go
serial number can be input via the
CODE
submenu, which is located in the
CONFIG
menu. This submenu also lists the serial number assigned to your instrument. To input an
activation code:
1.
In the
MAIN
menu, scroll to the
CONFIG
submenu using the joystick (
).
2.
Use the joystick (
) to select the function titled
CODE
, and then use the joystick (
) to activate the function. Note that the first
character of the current code value is highlighted (
below).
Figure 18: The Code Entry Function
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
