Chapter 3. Creating Data Recorder Files
DMS Go Operator’s Manual
71
Grid File
Reading Type
Set file style to Standard (normally recommended) or Extended.
Grid Labeling
Specify if rows and columns will have alphabetical or numerical tags.
Starting Row
Defines the number or letter assigned to the first row in the data file.
Ending Row
Defines the number or letter assigned to the last row in the data file.
Starting Column
Defines the number or letter assigned to the first column in the data file.
Ending Column
Defines the number or letter assigned to the last column in the data file.
Start Point
Defines the number assigned to the point in each data file location; a location is one cell grid
End Point
Defines the number assigned to the last point in each data file location.
File Name
16 character file name, set using the virtual keyboard. No two files in the DMS Go memory
may have the same file name.
Units
Selects either inches or millimeters as the unit of measurement
T-MIN
Defines the minimum thickness limit. Measurements below this limit cause an alarm to signal.
T-MAX
Defines the maximum thickness limit. Measurements above this limit cause an alarm to signal.
Table 3: Items to be Defined for Each File Type (cont.)
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
