35
Use this to specify:
•
The Start and Stop date of the search.
•
The Start and Stop time of the search.
•
The camera selection is not editable.
•
To search for recorded alarms.
Searching for All Recorded Events
Using the
Arrow buttons
to navigate, highlight
[START SEARCH]
, then press the
Enter
button. The Search
Results window will appear. For information about selecting a recorded event, see
Selecting from the Search
Results
, in this section.
Specifying Search Parameters
Selecting a Start and Stop Date
1. Using the
Arrow buttons
to navigate, highlight the
DATE
parameter, then press the
Enter
button. The
unit will enter Edit mode.
2. Use the
Arrow buttons
to change the start and stop date values. Use the
Arrow buttons
to navigate
among the different parameters.
3. To activate the start or stop date parameter, use the
Arrow buttons
to place an
[X]
in the check box.
4. Press the
Enter
button at any time to exit Edit mode.
Selecting a Start and Stop Time
1. Using the
Arrow buttons
to navigate, highlight the
TIME
parameter, then press the
Enter
button. The
unit will enter Edit mode.
2. Use the
Arrow buttons
to change the start and stop time values. Use the
Arrow buttons
to navigate
among the different parameters.
3. To activate the start or stop time parameter, use the
Arrow buttons
to place an
[X]
in the check box.
4. Press the
Enter
button at any time to exit Edit mode.
Searching for Recorded Alarms
1. Using the
Arrow buttons
to navigate, highlight the
ALARM
parameter, then press the
Enter
button.
The unit will enter Edit mode.
2. Use the
Arrow buttons
to activate the alarms search, by placing an
[X]
in the check box.
3. Press the
Enter
button at any time to exit Edit mode.
Starting the Search
Using the
Arrow buttons
to navigate, highlight the
[START SEARCH]
parameter, then press the
Enter
button. The Search Results menu will appear.
Содержание VSR-4
Страница 1: ...GE Security VSR 4 User Manual ...
Страница 6: ...VSR 4 User Manual vi ...
Страница 19: ...13 Figure 5 Typical network setup ...
