GE Security FASD700, Руководство по установке

Страница: 8 / 16

FASD700 aspirated smoke detector – Installation manual 8
3 U
SER GUIDE
3.1 Selecting and programming functions
Panels are programmed using the SELECT and CHANGE keys located on the side of the
unit.
1. Press and hold the SELECT and CHANGE keys simultaneously for 1 second to
initialise function selection.
2. Press and hold the SELECT key to step through each function. Each LED on the
front panel will be illuminated sequentially. Keep the SELECT key pressed until the
LED for the function you wish to change is selected.
3. Press and hold the CHANGE key to modify the setting.
A complete list of available functions for each panel is available in sections
3.2.2 FASD710 / FASD712 functions and 3.3.2 FASD715 / FASD717
functions.
3.1.1 Code entry
The code 510 must be entered to allow any function change.To enter the code:
1. Initialise function selection (see above) and select the Code entry LED. Press
change. The Code entry LED will flash.
2. Press and hold the CHANGE key until the number 5 LED on the bar graph is
illuminated.
3. Press the SELECT key.
4. Repeat steps 1 to 3 until the complete access code (510) has been entered.
The Unlocked LED will flash when the code has been entered correctly.
WWW.UKPANELS.COM