Activity Check
5
Home and Away
If you are going to be away for an extended period of time, it is necessary to set
the medication reminder option to
OFF
.
¾
When Away from Home:
On the panel front, press
Power
(if using a touchpad, press
3;
if using a key-
chain touchpad, press
Lock
). The panel announces
“Medication reminder
OFF”
and supervisory reports from panic buttons are ignored.
¾
When You Return:
On the panel front, press
Power
(if using a touchpad, press
2;
if using a key-
chain touchpad, press
Unlock
). The panel announces
“Medication reminder
ON”
and supervised panic buttons are monitored.
Activity
Check
The panel’s Activity Check feature monitors activity by responding to pro-
grammed sensors and the panel
Status
button. To establish an activity check
time period, contact your dealer or installer.
Using Activity Check
When the Activity Check feature is enabled, your panel monitors activity during
a set time period. If the panel fails to detect activity before the time period
expires, a report is generated and sent to the central station.
For example, if the feature is set to 10, the panel must detect activity during the
selected 10-hour period. If the panel fails to detect activity during this time, a
report is sent — signaling a potential emergency — to a station operator.
¾
If activity is not detected during Activity Check Time Period:
• The
Status
button flashes and the panel announces
“Activity time warning.
Please press STATUS”
once a minute for 15 minutes.
• All X10-controlled lights flash on and off during the announcement.
• A
No Activity Report
is sent if you do not press
Status
within 15 minutes after
the Activity Check time period expires.
Home and Away
If you are going to be away for an extended period of time, it is necessary to set
the activity check option to
OFF
.
¾
When Away from Home:
On the panel front, press
Power
( if using a touchpad, press
3;
if using a key-
chain touchpad, press
Lock
). The panel announces
“Activity Check OFF.”
All scheduled activity checks are turned off and the
Power
button flashes.
¾
When You Return:
On the panel front, press
Power
(if using a touchpad, press
2;
if using a key-
chain touchpad, press
Unlock
). The panel announces
“Activity Check ON.”
All scheduled activity checks are turned on and the
Power
button remains on.
