CamPlus 2 Traditional Box IP Camera
Installation Manual
2
Product overview
The CamPlus 2 Traditional Box IP Camera (
Figure 1
) is designed to operate from a PC on a network (10BT/
100B-TX). Once you configure your PC’s network settings and your LAN, you can use a web browser to
monitor both video and audio.
Note:
You must configure the network settings of the PC and its network environment in order to monitor images and audio
from the camera on the PC. You must also have a web browser installed on the PC.
Figure 1. Camera
Features
Camera features include:
•
Video signals captured by the progressive CCD (charge-coupled device) are converted into JPEG or
MPEG-4 streams, and can be monitored at up to 30 fps for VGA resolution.
•
Audio captured by the built-in microphone can be monitored with your PC via a network.
•
When you connect with a PoE (power over Ethernet, IEEE802.3af compliant) device, power is
supplied when you connect the LAN cable.
•
The 1/3-inch progressive CCD solid-state image sensor with VGA resolution (640 x 480 pixels)
provides high-fidelity motion image scanning in high-resolution.
•
You can set up to four designated surveillance areas, and have an alarm issued when motion is
detected.
•
The FTP backup function and recording of each log on an optional SD memory card are available
using the featured SD memory card slot.
Note:
Performance with this camera has been checked using Panasonic SD memory cards up to 2 GB. If another SD memory
card is used, this camera may not operate properly. The SD High Capacity (SDHC) card is not compatible with this camera.
LOCK
