Quick Start 12
LOGIQ
500 Quick Start Guide
2276613–100 Rev. 0
B-Mode Controls
There are four Soft-Menu pages for B-Mode imaging adjustments.
Dynamic Range—Controls how echo intensities are converted to
shades of gray, thereby creating a range of gray scale that can be
adjusted.
Gray Map—Determines how the echo intensity levels received are
presented as shades of gray.
Focus Number—Changes the number of focal zones so that the beam
can be tightened or expanded for a specific area.
ATO Create—Automatic Tissue Optimization optimizes the image based
upon a specified Region of Interest (ROI) or anatomy within the display.
ATO On/Off—Highlighted when the ATO map is active on the image;
toggle on and off to display that same ATO map again.
Frame Average—Averages previous frames of image data with the
current frame.
Imaging Freq—Allows more echoes to pass through.
Image Softner—Adjust for the amount of smoothing applied.
Color—Allows for enabling B-Mode image colorization.
3D Mode—Allows for 3D Mode option activation.
48
Preset
B
Focus
Number
Gray
Map
Dynamic
Range
Set Up
ECG
B–2
2
ATO
On/Off
ATO
Create
Preset
B
Set Up
ECG
Image
Softner
Imaging
Freq
Frame
Average
3D
Mode
Color
OFF
3 MHz