GE MDS Mercury 3650, Справочное руководство

Страница: 55 / 211

46 Mercury Reference Manual 05-4446A01, Rev. E
Figure 3-13. Network Configuration Menu
(Option Set 1 radio)
• Network Interface Config —Presents a menu where you can view or
set various parameters (VLAN Status, IP Configuration, and
DHCP Server Configuration).
• Ethernet Port Config —Presents a menu for defining the status of
the Ethernet port (enabled or disabled), port follows association,
and Ethernet filtering configuration. Detailed explanations of
this menu are contained in
Ethernet Port Configuration Menu on
Page 56 .
• Bridge Configuration —View/set options for Ethernet Bridge oper-
ation.
• SNMP Agent Config —View/set SNMP configuration parameters.
See “SNMP Agent Configuration” on Page 58 for more infor-
mation.
• AP Location Info Config —On an AP this submenu allows for con-
figuring an AP to automatically download the AP Locations
File to its associated Remotes. On a Remote this submenu
allows for downloading an AP Locations File.
See “AP Loca-
tion Push Config Menu” on Page 60 for additional details.
• 802.11 Configuration —Presents a submenu for configuring the
radio’s internal WiFi module to be an Access Point for other
WiFi devices (APs), to connect to a WiFi Access Point at
another location (Station), or to connect directly to another
WiFi device (Ad-Hoc).
• SNTP Server —Address of SNTP server (RFC 2030) from which
the transceiver will automatically get the time-of-day. You can
also manually set the date and time. A Mercury unit tries to get
the time and date from the SNTP server only if an IP address is
configured. It will continue to retry every minute until it suc-