GE MDS Mercury 3650, Справочное руководство

Страница: 148 / 211

05-4446A01, Rev. E Mercury Reference Manual 139
Invisible place holder
Figure 3-118. Radio Test Menu
NOTE :
Using Test Mode disrupts traffic through the radio. If the unit
is an Access Point, it will disrupt traffic through the entire
network. The Test Mode function is automatically limited to
10 minutes. Only use Test Mode for brief measurements.
•
Radio Mode
—Sets/displays the radio’s operating mode. To
change the setting, press A on the PC’s keyboard and press the
Spacebar to toggle between the two settings. Press the Enter key
to select the desired state. [
Normal, Test; Normal ]
•
Test Status
—This read-only parameter shows the current state of
the radio.
[
Radio is Operational, Reconfiguring the Radio, Ready to KEY
]
The following parameters are read-only unless A) Radio Mode is first
selected and set to
Test
. In Test Mode, these items become selectable,
and you can set their entries using the Spacebar or with a numeric entry,
followed by pressing the Enter key.
• Test Key —Sets/displays keying status of the radio’s transmitter.
Use the Spacebar to view selections. [
disabled, enabled; disabled
]
• Test Transmit Power —Sets/displays the transmitter’s power set-
ting. Make a numerical entry within the allowable range.
[3650 model:
+23 dBm max ]
[900 model:
-30 to +29 dBm
]
• Test Channel —Sets/displays the radio’s test channel number.
Make a numerical entry within the allowable range.
[
0-13; 0 ]
•
Test RF Bandwidth
—Sets/displays the transmitter’s bandwidth for
testing. Use the Spacebar to view selections.
[
1.75. 3.5 MHz; 1.75 MHz
—additional selections for 3650 model]
• Test Burst Percentage —Sets/displays the percentage of Burst size
to use for testing. Make a numerical entry within the allowable
range. [
0-100%; 100 ]