manualshive.com logo in svg

GE MDS Mercury 3650, Справочное руководство

Поделиться
Скачать
GE MDS Mercury 3650 Скачать руководство пользователя страница 135

126

Mercury Reference Manual

05-4446A01, Rev. E

Reprogramming Menu

The factory sometimes offers upgrades to the transceiver firmware. 
Loading new firmware into the unit will not alter any privileges pro-
vided by Authorization Keys and does not require you to take the trans-
ceiver off-line until you want to operate the unit with the newly installed 
firmware image.

Firmware images are available free-of-charge at:

www.GEmds.com/Resources/TechnicalSupport/

NOTE:

Always read the release notes for downloaded firmware. These
notes contain important information on compatibility and any
special steps needed for proper installation.

All units and versions have two resident images. Version 1.4.4 had 
two.mpk files, one for the Access Point and one for the Remote. As of 
version 2.1.0, there is only one mpk file which you can use with both 
Access Points and Remotes.

The transceiver has two copies of the firmware (microprocessor code) 
used for the operating system and applications. One copy is “active” and 
the second is standing by, ready to be used once activated. You can load 
new firmware into the inactive position and place it in service whenever 
you desire.

Invisible place holder

Figure 3-104. Reprogramming Menu (AP)

Содержание Mercury 3650




















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды