GE MDS MDS SD4 Series, Руководство для стартапов

Страница: 6 / 20

4 MDS SD4 Startup Guide 05-4669A01, Rev. B
Figure 3. Typical Remote Station Arrangement
Installation Steps
Below are the basic steps for installing the transceiver. In most cases,
these steps alone are sufficient to complete the installation. Refer to
the
Reference Manual for additional details, if required.
1. Mount the transceiver to a stable surface using the brackets
supplied with the radio. Begin by attaching the radio’s mounting
brackets to the bottom of the transceiver case (if not already
attached) using the four 6-32 x 1/4 inch (6 mm) screws supplied.
Figure 4 shows the mounting bracket dimensions.
NOTE:
To prevent moisture from entering the radio, do not mount the
case with the cable connectors pointing up. Also, dress all
cables to prevent moisture from running along the cables and
into the radio.
POWER SUPPLY
10.5–16 VDC @ 2A
Negative Ground Only
TRANSCEIVER
LOW
-LOSS FEEDLINE
ANTENNA
SYSTEM
DATA TELEMETRY
DEVICE