GE Interlogix KTD-405, Руководство пользователя

Страница: 34 / 60

Operation KTD-405/405A User Manual
34 1036547C / December 2003
5.1.3.4 S
ETTING A
P
RESET
1)
Position the camera.
2)
Press
store.
3)
Enter the preset number using the number keys, or
aux 1
,
2
,
3
, or
4
for presets 58 through 61.
Note:
Presets 62 and 63 cannot be set using the number keys; they can be set by using the and keys only.
4)
Press
store.
5.1.3.5 S
ETTING
A
UTOPAN
L
IMITS
Left Autopan Limit
To set the limit for the left turn-around point of the camera’s back and forth motion, as wells as the tilt and
zoom positions for the autopan, perform the following:
1)
Position the camera at the desired left limit.
2)
Tilt and zoom the camera into the desired position.
3)
Press
store
.
Note:
Do not attempt to enter a preset number. The preset number 62 is reserved for the left autopan limit and is
automatically entered when you perform step 5.
4)
Press .
5)
Press
store
again. The Store Preset Number displays on the keypad.
Right Autopan Limit
To set the limit for the right turn-around point of the camera’s back and forth motion, perform the
following:
1)
Position the camera at the desired right limit and press
store
.
Note:
Do not attempt to enter a preset number. The preset number 63 is reserved for the right autopan limit and is
automatically entered when you perform step 3.
2)
Press
.
3)
Press
store
again. The Store Preset Number displays on the keypad.
5.1.4 S
ELECTING A
M
ONITOR
The monitor selection is internal to the keypad; no command is sent to the switcher. There are two
monitor-selection methods:
1)
Press the
mon
key.
2)
Enter the monitor number including any preceding zeroes, or
Enter the monitor number directly, then press
.