GE Interlogix KTD-405, Руководство пользователя

Страница: 21 / 60

KTD-405/405A User Manual Programming
1036547C / December 2003 21
4.2.1 S
OFT
K
EY
R
EPROGRAMMING
From the supervisor programming mode you can reprogram any of the soft keys with any of the available
commands. See
Appendix B. Reprogrammable Keys and Commands
for a list of the keys and commands.
Note:
Pressing and holding the
seq
key returns you to the normal operating display, except on displays where
esc
is required to exit.
1)
Beginning at the normal operating display, enter the supervisor programming mode by pressing and
holding the
key. Quickly move to the next step after the keypad beeps and the code entry
display appears.
CAMERA 0
MONITOR 1
Normal operating display
2)
At the code entry display, enter the access code for the supervisor menus by pressing the
1
,
4
,
7
,
6
,
and
seq
keys. The display will automatically advance to the next display.
ENTER PROGRAMMING
CODE:
Code entry display
3)
Press the
!
key (for NEXT) until the PROGRAM SOFT KEYS display appears.
4)
At the PROGRAM SOFT KEYS display, press the
!
side of the
zoom
,
focus
, or
iris
key.
PROGRAM SOFT KEYS? _
(+)=YES (-)=NO
"
NEXT
!
PROGRAM SOFT KEYS display
5)
At the PRESS KEY TO PROGRAM display, press any of the available reprogrammable keys (see
Appendix B. Reprogrammable Keys and Commands
).
PRESS KEY TO PROGRAM:
ESC=EXIT
PRESS KEY TO PROGRAM display
6)
At the command selection display, use the joystick (or the & and
#
keys) to scroll up and down
through the list of commands until the desired command appears. The commands are listed in
alphabetical order. Then press the
key ( ' ─ on the display) to save the selected command for
the reprogrammed soft key.
Note:
Pressing the '' key returns you to the PRESS KEY TO PROGRAM display.
SLW/STOP -
#
STABILIZ
(
()
) (
'
-)=SAVE
''
BACK
Command selection display