58
PAC8000 Workbench Getting Started Guide
5. Select
the
Version 2 Firmware
option if you will be downloading your project to a
controller that has Version 2.00 or higher of the Firmware. Doing so allows you to
take advantage of the features that were not available in previous versions of the
controller. Version 2 features include: Retained Variables, Trusted Hosts Table,
Keyswitch, Controller Password, and the Register Protection Table. These features
are discussed in greater detail in the
Core Components Training Guide
.
6. The
Create new controller
form should now appear as follows:
7. Click
Apply
and the
8000 IO Configurator
utility is launched.
8. The
Create Controller
dialog appears. Enter the
Node Number
and click
OK
.
(The default Node Number is 126.) For our example, use a node number of
50
.
GE Intelligent Platforms, Inc.
September 2010
