GE Grid Solutions MDS Master Station, Техническое руководство

Страница: 37 / 137

MDS 05-6399A01, Rev. F
MDS™ Master Station
33
services web http(s) enabled true/false
General Configuration
For initial configuration of the Master Station, perform the following steps:
1. Connect the unit to a PC via an Ethernet connection.
2. Configure your PC network settings to an IP address on the same subnet as the unit. The
default subnet mask is
255.255.255.0
.
For IP addressing the Master Station uses a routing prefix expressed in CIDR notation
instead of specifying a subnet mask. The CIDR notation is the first address of a network,
followed by a slash character (/), and ending with the bit-length (max 32) of the prefix.
A subnet mask is expressed in dot-decimal notation. For example,
192.168.1.0/24
is
equivalent to specifying
192.168.1.0
with a subnet mask of
255.255.255.0
.
3. Open a web browser and navigate to the IP address of the unit (default Ethernet IP
address is
192.168.1.1
). The initial sign-in prompt appears.
4. Enter the username and password (admin is the default entry for both fields), then click
‘Sign In’.
5. On first-time login, the Initial Setup Wizard will appear and provide guidance for general
device setup. This is disabled after the initial setup has been complete but may be re-run
at any time by accessing the Wizards link on the left side of the screen, and clicking
Initial Setup.
Key items that should be reviewed and/or set for the radio include:
•
Create one-time programmable passwords for unit recovery
•
Change login passwords (to maintain security)
•
Evaluate default factory configuration and lock the unit down to the required security level
When the Initial Setup wizard completes, to configure SD interfaces (MPRS), select
Wizards

SD Setup , which steps you through initial SD Radio Module configuration. Key items
that should be reviewed and/or set include:
•
Radio Mode
•
Frequency plan
•
Modem selection
•
Keying mode
•
Repeater Configuration (if necessary)