GDS GDS DRIVE 500, Руководство по установке и обслуживанию

Страница: 16 / 17

16
5. M
AINTENANCE
D
ETAILS
WARNING!
Failure to maintain equipment may result in injury or death and/or damage to property and equipment
Recommended maintenance to be performed on the operator and gate are as follows:-
Operator performs between 20-49 cycles a day every 6 months
Operator performs under 20 cycles a day every 12 months
Date:
Site Name:
Site Address:
Before commencing maintenance on the operator, isolate the electrical supply to ensure operator will not
run inadvertently.
Gate rolls freely when in manual.......................................................................................................
Gate wheels and guide rollers in good condition..............................................................................
Gate stops are installed and in good condition, not loose..................................................................
Gate rack is tight & correct clearances between pinion wheel & rack..............................................
Gate track is not damaged..................................................................................................................
Gate operator mounting bolts tight....................................................................................................
No oil leaks from gearboxes..............................................................................................................
Inside operator and control box clean................................................................................................
‘Baygon’ Surface Spray around operator (not on electronics)..........................................................
All electrical connections tight.........................................................................................................
Check battery charge voltage correct.................................................................................................
Unplug mains power and run operator a number of times on battery. The operator should not start
Slowing down or struggle, if it does, replace battery (battery life generally 2-5 years) ..…………..
Limit Switches operate in appropriate positions ...............................................................................
External safety devices work effectively / cleaned...........................................................................
General operation i.e. speed, auto close etc normal..........................................................................
Comments........................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................
Service performed by:.....................................................................................................................................